Microwave dryer for chemical powder

Technical advantages:

1) Wide applications: Belt dryer is specially designed for drying those wet material which need long residence time. The moving speed of the belt is controlled by inverter and the velocity can be displayed on control panel. The residence time can be 5-30 minutes to meet the drying requirements of different material and moisture content.

2) Energy-saving: Different hot air circulation type can be designed based on the natures of wet material for energy-saving.

3) Uniform drying: Hot air distributor, hot air deflector and perforated plate are equipped to make sure the hot air flow in each circulation loop is stable and uniform. The temperature difference is within 2 ℃inside the drying zone. So the drying is very uniform.

4) Environment friendly working condition: The hot air is flow downwards to penetrate through the material to prevent dust.

5) Easy operation and maintenance: The whole drying system is highly automatic. The simple but practical design can not only reduce production cost but also the maintenance and repair cost.

Microwave drying equipment by using the principle of water molecules absorb microwave, the rapid movement of water molecules heat to evaporate moisture, the microwave drying equipment is mainly used in the feed powder and dehydration drying of granular materials, such as slag, sugar, animal feed, etc.

Spec Kesu-1.2-8 Kesu -1.2-10 Kesu -1.6-8 Kesu -1.6-10 Kesu -2-8 Kesu -2-10
Unit number 4 6 4 6 4 6
Belt width(m) 1.2 1.2 1.6 1.6 2 2
Drying section length(m) 8 10 8 10 8 10
Thickness of the material (mm) 10-80
Temperature (℃) 60-130
Steam pressure (Mpa) 0.2-0.8
Steam Consumption Kgsteam (kgH2O) 2.2-2.5
Drying strength (kgH2O) 6-20kg/m2h
Total power of blower ( kw) 3.3 4.4 6.6 8.8 12 16
Total power of equipment (kw) 4.05 5.15 7.35 9.55 13.1 17.1

Your Name

Your Email

Inquiry Product

Your Message

Captcha